智能制造網>產品庫>物聯網>傳感器>液位傳感器>>2L-GSM 2L-LIC-D/P,2L-LI,2L-LI-D/P,2...

2L-GSM 2L-LIC-D/P,2L-LI,2L-LI-D/P,2L-SC齒輪式液位傳感器

參考價	面議

參考價

面議

具體成交價以合同協議為準

公司名稱中山市泰倫特電子科技有限公司
品牌
型號
所在地中山市
廠商性質經銷商
更新時間2024/10/30 10:08:56
訪問次數102

產品標簽:

在線詢價收藏產品點擊查看電話

聯系我們時請說明是智能制造網 上看到的信息，謝謝!

索取相關資料

公司介紹主營產品

中山市泰倫特電子科技有限公司代理韓國工控工業自控元器件、儀器儀表、開關按鈕、HANYOUNG(韓榮電子)  AUTONICS（奧托尼克斯） KOINO建興  KACON(凱昆) YONGSUNG (韓國龍聲) METRONIX DAEYANG(大洋)QLIGHT(可萊特-警報燈) HEDSS（海德）WOONYOUNG(云永)  DAEYANG(大洋電機) 、EOCR(三和) 、POWNIX(普力士) 、LG 、METRONIX(脈超尼斯)、PATLITE（派特萊）WERMA(偉馬快德)EOCR(韓國三和電機保護器) TEND(天得電機) FOTEK(陽明工控) MOUJEN(中國臺灣茂仁)  SUNX(日本神視)  SICK(德國施克)  韓國MENICS  韓國KONICS  美國HONEYWELL(霍尼韋爾)  LG低壓電器  SAMYOUNG(韓國三榮)  SUNGHO(韓國成浩)  SUNKWAN(韓國鮮光)  FOX(DAESUNG韓國大成)  韓國FAS、  DongA(東亞機電)  Daeil大一  CHANTO(中國臺灣長拓)  日本SMC氣動  中國臺灣HIWIN直線導軌  法國高諾斯(Crouzet)  日本和泉(IDEC)  德國P+F倍加福(PEPPERL+FUCHS)  中國臺灣ANLY(安良機電)  中國臺灣SAMD(山電電機)  HIBOX(韓國海博開關盒/接線盒)ELECSON（韓星）電壓、電流、功率、頻率數顯表、計數器、計米器、時間繼電器，轉速表，線速度表、溫控表、接近開關 光電開關，旋轉編碼器、光纖開關、液位控制器、按鈕開關、指示燈、光字牌開關、急停開關、選擇開關、微動開關、行程開關、多層信號燈,警示燈,層燈，塔燈,旋轉報警燈、蜂鳴器、保險絲座、接線端子、腳踏開關、天車開關、凸輪開關、十字組合開關、開關盒等、中間繼電器固態繼電器、功率調節器、腳踏控制器，腳踏調速器電子踏板黃玲
智能機電保護器D3-PRO系列溫控范圍 -10-50(℃)工作電流二次電流5安(A)工作電壓 AC220V- +10%或110V- +10%(其它電壓可向本公司咨詢)(V)接線方式二次回路外形尺寸 WXHXD 180X110X75.7(mm)重量 1kg(包括D3-PRO及MCT)
中山市泰倫特電子科技有限公司是韓國三和（EOCR）株式會社在中國地區的代理公司，主要銷售機電保護器:
•  EOCR-4F智能過電流繼電器
•  EOCR-SP1/SP2智能過電流繼電器
•  EGR接地保護繼電器
•  EOCR-3MS/FMS智能過電流繼電器
•  EOCR-FD智能過電流繼電器
•  EOCR-3DS智能過電流繼電器
•  零序電流互感器ZCT
•  EVR-FD電壓繼電器
•  EVR電壓繼電器
•  EUCR-3C欠電流繼電器
•  EOCR-DS(T)固態過電流繼電器
•  EOCR-1P固態過電流繼電器
•  EOCR-SE2固態過電流繼電器
•  EOCR-AR固態過電流繼電器
•  EOCR-DS1/DS2/DS3智能過電流繼電器
•  EOCR-SS1/SS2智能過電流繼電器
•  EOCR-3MZ/FMZ智能過電流繼電器
•  EOCR-3DM/FDM智能過電流繼電器
•  EOCR-3DZ智能過電流繼電器
•  EOCR-3DD智能過電流繼電器
•  電流互感器CT
•  EVR-PD電壓繼電器
•  EUCR欠電流繼電器
•  EOCR-4E固態過電流繼電器
•  EOCR-SP固態過電流繼電器
•  EOCR-ST固態過電流繼電器
•  EOCR-SE固態過電流繼電器
•  EOCR-SS固態過電流繼電器

展開顯示更多內容

• EOCR-4E固態過電流繼電器 • EOCR-SP固態過電流繼電器• EOCR-ST固態過電流繼電器• EOCR-SE固態過電流繼電器
• EOCR-SS固態過電流繼電器

產品簡介在線詢價

2L-LIC-D,2L-LIC-D/P,2L-LI,2L-LI-D/P,2L-SC齒輪式液位傳感器Model2L-GSMInputVoltage0~1

2L-GSM 2L-LIC-D/P,2L-LI,2L-LI-D/P,2L-SC齒輪式液位傳感器產品信息

2L-LIC-D, 2L-LIC-D/P,2L-LI,2L-LI-D/P,2L-SC齒輪式液位傳感器

Model		2L-GSM
	Input Voltage		0~1.5V / 4~20mA
	Feature		Water and oil tank with no roof
	Function		For Indicator and Indicator Controller
	Serial Number		2L-LIC-D, 2L-LIC-D/P, 2L-LI,2L-LI-D/P,2L-SC
	Main body		HEAD - P/P .ABS.Fiber FLOAT- P/P.P/E.SUS

▶

2L-GSM is a simple-structure gear-type level sensor which is manufactured so as to bear humidity or shock well, it is installed in the water tank or the oil tank in danger of explosion, and the quantity in the tank can be checked by Measurer (M) in it. At the time of checking the quantity in the tank indoors, checking the instruction indoors is
possible by installing the converter in the sensor head and the sensor body separately and by connecting DC24V to the digital meter or the analog meter of the sensor in series, and it is designed as a structure where the control and ‘high and low’
alert is possible at the time of installing 4～20㎃ input unit.

▶	When the sensor cannot be inserted into the tank due to no space between the tank and the ceiling height, use a gear-type sensor.(Space should be more than 300㎜.
▶	Area where temperature is high, such as BC storage tank, hot spring water tank, use high-temperature-withstanding material (PP+ Fiber) for the body.
▶	Used for the water tank, the oil tank, the sewage disposal tank and the tank in danger of explosion at the time of the electrical supply on the instruction and its control. (Hydrochloric Acid, Surfuric Acid and special agents are separately ordered)

▣

If the user pulls SUS rope in the state that the rope is wound in the rope base by the board spring on which the special heat treatment of SUS board is applied in the inside of the sensor body, the spring is wound and SUS rope is moved up and down so that
the gear connected to the board spring shaft can give instructions to the other gears, and as FLOAT is moved up and down depending on the liquid surface of the water or the oil by its weight and buoyancy in the tank, the necessary instruction is operated in
sequence.


▣	Basic type is manufactured as 2“ socket type.
▣	Flange type is separately ordered..(3“F/4"F:PVC)
▣	Used temperature 60℃(For general purpose),80℃(For high temperature)
▣	‘Used for water’ type is manufactured as PP/FLOAT.
(MAX:12M)
▣	Material ABS Material (General) PP + Fiber (Separate Order for High Temperature)
※	Reference : Please adjust 2/3 point of the lower part of P/P Float as 99% position of water level for your control.


▣	Basic type is manufactured as 2“ sockket type.
▣	Flange type is separately ordered.(3“F/4"F:PVC)
▣	Used temperature 60℃(For general purpose),80℃(For high temperature)
(MAX:12M)
▣	Material ABS Material (General) PP + Fiber (Separate Order for High Temperature)
※ ※	Reference : Please adjust 2/3 point of the lower part of Float as 99% position of water level for your control. When the height of the tank is 1m, use dish-type FLOAT.

▣

Place an order after selecting one among 2“ socket, 3” flange and 4“ flange sensor fastening methods and recording the height from the bottom of the tank to the top.

▣

For FLOAT, place an order after seeing the below table according to use.

Material Frame	Size	Weight	Material Frame	Size	Weight
P/P	195×80Ø	980g	SUS304	250×76Ø	1kg
P/P	330×56Ø	740g	SUS304	70×150Ø (Dish-type)	900g

●

Sensor length is 6 kinds of 1m․2m․3m․6m․9m․12m. Place an order after selecting one according to the height of the tank.

●

If you want to check the instruction level of the tank indoors, place a separate order .

●

For high-temperature use or agent use, place a separate order.

●

If the instruction level will be checked indoors, place an order for the current-type
(4～20㎃). (DC24V supply/series connection with sensor)

◆	When you put FLOAT into the tank, hold a rope and don't release it, but release it when Float goes down perfectly.
◆	At the time of manufacturing, process can be carried out only when, as Float doesn't reach the tank bottom, the state that it goes down perfectly is 0m(0%) and the maximal position(99%) is adjusted in the upper part of the tank at the time of order.
◆	When you check the instruction level indoors using 4～20㎃, open the sensor head cap, make zero adjustment to 0% at the time of 0m(0%) and make SPAN adjustment to 99% at the 99% position for use.
◆	When 0% instruction isn't carried out as Float reaches the tank bottom, shorten the string of the loop connected to the rope's end for use.
◆	When Float cannot be put into the upper part of fastened socket or the flange, first put the string of the loop into the tank, pull it, put Float into the tank and hang the loop for use.
◆	At the time of connection, open the sensor head cap at the right side and carry out connection using 1/2“ connect.
◆	When you put Float into the tank, don't release a rope.(It can cause damage to rope loop and sensor)
◆	Don't open the cap where caution sticker is attached to the sensor body.(It can cause function troubles)
◆	When the tank length is low(Less than 1m), use dish-type Float.(Instruction level's range becomes large)